Looks like you have the serial heartbeat connection defined but not
working. The serial connection is where you have a null modem cable
installed on the same 2 ports on the LVS machines and it performs the
heartbeat accross that as well as the ethernet connection. If you are NOT
using this feature then just comment out the appropriate section in the
config file and restart the heartbeat.
There is no cause for concern unless you ARE trying to use the serial
connection in addition to the ethernet heartbeat.
On Mon, 25 Sep 2000, Jeremy Hansen wrote:
> I just wanted to report this little error I see from heartbeat, although I
> can't see the effects of this error. Heartbeat seems to work fine.
> Sep 25 16:23:13 ld1 heartbeat: warning: Return code 1 from
> Sep 25 16:23:21 ld1 heartbeat: ERROR: TTY write timeout on
> [/dev/ttyS0] (no connection?)
David D.W. Downey
Internet Security Specialist