|
Thanks a lot. i'll try.
Pawel Osko
Draschl Clemens <clemens.draschl@xxxxxxxxxxxxxx> wrote:
>hi!
>
> seems, that you didn't read the howto not carefully enough ;-)
> the vip and the director-inside_ip are in the same network. the point
> is, that the 255.255.255.0-network sees the .128-network, but not vice
> versa. and, why do you nat public to public ip's? if you want that, use
> direct routing. if you don't give the real-servers private ip's like
> 192.168.1.0 (like in the howto) the script is doing the rest of the
> work, like adding routes and iphains.
>
> to your problem: the script does a traceroute to the client for the
> 2-hop-test. as the client is in the same subnet (the .128-mask doesn't
> really make a big problem for this) the client is only one hop away.
> that's the reason, why it fails. so use one public ip for the vip of the
> director, and private ip's for the real-servers. just change the script
> and everything will run fine
>
> hope it helps
> clemens
>
--
Jest niezly ... i liscik napisze
OnetKomunikator [ http://ok.onet.pl/instaluj.html ]
|
