|
Thanks for the help.
lco
On Fri, 2001-10-19 at 14:26, Alexandre Cassen wrote:
> Hi ico,
>
> >I'm having a problem getting keepalived to be able to fail-over 2 web
> >sites on lvs with a groups of real servers on each site. Like the
> >following...
> >
> >
> >internet--|
> > |
> > Lvs-nat-(keepalived)-------
> > | |
> > 192.168.2.10:80 192.168.2.11:80
> > | |
> > | |
> > |tcp port 80 |tcp port 80
> > |-----------| |--------------|
> > real-svr1 real-svr2 real-svr3 real-svr4
>
> I run the same topology on a prod env, so we need to investigate into your
> problems
>
> >my problems is that keepalive only works on the 192.168.2.10:80 and
> >fails over for real-svr1 and real-svr2 but not for 192.168.2.11:80 and
> >real-svr3 and real-svr4. What could be the problem? I'm using HTTP_GET
> >method to monitor the real-svrs. Is it possible that keepalived can only
> >monitor one set of servers?
>
> As many as you want (have tried with 15 VS but must work with more)
>
> >I'm also looking in my /var/log/debug file to see if there's any hints
> >there but I only see the <Global definitions> listed and not a list of
> >LVS topology. What would cause the LVS topology to not show up?
>
> Can you please send me your keepalived.conf file ? if the <LVS Topology>
> part is empty so you have a configuration problem.
> The keepalived configuration keywords are case sensitive...
>
> Look forward to you,
>
> Best regards,
> Alexandre
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
keepalived.conf
Description: Text document
|
