|
Yes, freebsd have ipip tunnel feature but i don`t know how configure it.
When i installing ipip tunnel to linux, i runnig ifconfig with one
ip-address parametr.
example from www.linuxvirtualserver.org: ifconfig tunl0 172.26.20.110
netmask 255.255.255.255 broadcast 172.26.20.110 up
and this cut from man ifconfig for bsd:
tunnel src_addr dest_addr
(IP tunnel devices only.) Configure the physical source and
des-
tination address for IP tunnel interfaces (gif(4)). The argu-
ments src_addr and dest_addr are interpreted as the outer
source/destination for the encapsulating IPv4/IPv6 header.
needed two ip addresses?
Joseph Mack <mack.joseph@xxxxxxx>@LinuxVirtualServer.org on 20.06.2002
16:32:22
Please respond to lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Sent by: lvs-users-admin@xxxxxxxxxxxxxxxxxxxxxx
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
cc:
Subject: Re: ipip & bsd question
kgaliy@xxxxxxxxxxx wrote:
> second real server based on FreeBSD 4.6 and i can`t setup ipip tunnel
this.
> need more information. I didn't know freebsd had ipip tunnel.
well does freebsd have ipip tunnel?
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
