LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: Accessing lvs service from the NAT router

To: "lvs-users@xxxxxxxxxxxxxxxxxxxxxx" <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Accessing lvs service from the NAT router
From: Nate Carlson <natecars@xxxxxxxxxxxxx>
Date: Tue, 18 Feb 2003 10:51:08 -0600 (CST)
On Tue, 18 Feb 2003, Ian Millsom wrote:
> Sorry should have stated. There were no NAT rules at all. Of course to
> get net you would need MASQ :) which at this time, was not enabled

I've removed all nat and filter rules; still no go. Here's my setup:

Virtual IP:     192.168.0.1
LB Internal IP: 10.0.0.1
RS1 IP:         10.0.0.10
RS2 IP:         10.0.0.11

10.0.0.1 is the default gateway for everything behind the firewall. If I
hit 192.168.0.1 port 80 from 192.168.0.2, it works great.. if I try to hit
it from the load balancer itself, either of the real servers, or 10.0.0.2,
no go. It's weird; sounds like we've got a very similar config, but it
works for you and not for me.  :)  Do you have anything in /proc being
tweaked from the defaults?

> LVS works without any rules, so try and remove them and try again. FYI
> I am using 2.4.20 and IPVS v1.0.5 with this working.

I'm on 2.4.20, IPVS v1.0.7.. no go.

-- 
Nate Carlson <natecars@xxxxxxxxxxxxx>   | Phone : (952)943-8700
http://www.real-time.com                | Fax   : (952)943-8500



<Prev in Thread] Current Thread [Next in Thread>