|
"Farrell, Doug" wrote:
>
> Hi all,
>
> I'm using the RedHat Piranha version of LVS and have successfully configured
> an LVS-NAT
can you turn line wrap on please, your paragraphs are all one line and hard to
read
> Director
> eth0 IP : 10.60.25.125 gateway=10.60.24.1
> eth0:1 VIP : 10.60.25.131
> eth1 IP : 192.168.1.101
> eth1:1 VIP : 192.168.1.103
>
> Real Server 1
> eth0 IP : 192.168.1.104 gateway=192.168.1.103
> eth1 IP : 10.60.25.127
having IPs in different networks is going to be interesting from the networking
point of view. Do you have to have both IPs in different networks?
have you got the LVS to work for each VIP separately?
You appear to have two one-net LVS-NAT setups in parallel (see HOWTO).
If so, make sure you understand this setup.
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
LMIT, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
|
