|
You also need to do it for all interfaces i.e.
echo "1" >/proc/sys/net/ipv4/conf/eth0/arp_ignore
echo "1" >/proc/sys/net/ipv4/conf/eth1/arp_ignore
etc.
ARP replies go through any available interface
2009/2/17 Reiner Menkens <reiner.menkens@xxxxxx>
>
> Hi,
> >
> > Hm, thanks for the info :)
> >
> > I followed the LVS-mini howto
> > http://www.austintek.com/LVS/LVS-HOWTO/mini-HOWTO/LVS-mini-HOWTO.html
> > and the realservers have been set-up using
> >
> >
> > --------
> > echo "0" >/proc/sys/net/ipv4/ip_forward
> >
> >
> > /sbin/ifconfig lo:87 192.168.1.87 broadcast 192.168.1.87 netmask
> > 255.255.255.255 up
> > /sbin/route add -host 192.168.1.87 dev lo:87
> >
> > echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
> > echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
> > --------
> I think you have to set arp_announce to 2 as described in
> http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.arp_problem.html#2.6_arp
> echo "2" >/proc/sys/net/ipv4/conf/eth0/arp_announce
> HTH
> bye
> Reiner
>
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
--
Regards,
Malcolm Turnbull.
Loadbalancer.org Ltd.
Phone: +44 (0)870 443 8779
http://www.loadbalancer.org/
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
