|
Hi all,
I try to configure LVS-TUN to bance two server squid.
In DIRECT server I configured:
eth0:0 interface with VIP and enabled ipforward
lvs by using this command: ipvsadm -A -t VIP:8080 -p // ipvsadm -a -t
VIP:8080 -r RIP-1:8080 -i // ipvsadm -a -t VIP:8080 -r RIP-2:8080 -i
In REAL server I cnfigured:
tunl0 interface with VIP and enable ipforward
modify those files: echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore // echo 1
> /proc/sys/net/ipv4/conf/default/arp_ignore // echo 1 >
/proc/sys/net/ipv4/conf/eth0/arp_ignore // echo 1 >
/proc/sys/net/ipv4/conf/tunl0/arp_ignore // echo 2 >
/proc/sys/net/ipv4/conf/all/arp_announce // echo 2 >
/proc/sys/net/ipv4/conf/default/arp_announce // echo 2 >
/proc/sys/net/ipv4/conf/eth0/arp_announce // echo 2 >
/proc/sys/net/ipv4/conf/tunl0/arp_announce
Squid listen on port RIP:8080.
In this configuration clients can't browsing any Internet web page.
Pelase, could you help me?
Many thanks.
Valerio
=
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
