|
Hello All,
I am setting up a two node HA/Load-balancing solution using LVS/Ultramonkey
according to this guide:
http://www.ultramonkey.org/3/topologies/sl-ha-lb-eg.html
I have the issue that heartbeat does not automatically start the ldirectord,
I start it myself and sart the master on the master node but the VIP
(174.121.60.28) is not visible outside of the master server.
Ifconfig shows this:
eth0 Link encap:Ethernet HWaddr 00:26:B9:7C:DF:0B
inet addr:174.121.60.26 Bcast:174.121.60.31 Mask:255.255.255.248
inet6 addr: fe80::226:b9ff:fe7c:df0b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16578 errors:0 dropped:0 overruns:0 frame:0
TX packets:19160 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1946167 (1.8 MiB) TX bytes:3890358 (3.7 MiB)
Interrupt:169 Memory:da000000-da012800
eth0:1 Link encap:Ethernet HWaddr 00:26:B9:7C:DF:0B
inet addr:174.121.60.28 Bcast:174.121.60.31 Mask:255.255.255.248
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:169 Memory:da000000-da012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1114 errors:0 dropped:0 overruns:0 frame:0
TX packets:1114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:89934 (87.8 KiB) TX bytes:89934 (87.8 KiB)
lo:0 Link encap:Local Loopback
inet addr:174.121.60.28 Mask:255.255.255.255
UP LOOPBACK RUNNING MTU:16436 Metric:1
I would appreciate if anyone could tell me what could be wrong? I cannot
find anything in the logs.
Kind regards,
Cyrus
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
