Re: [lvs-users] question about LVS

[Michiel van Es <mve@xxxxxxxxxxxxxxxxx>]

-------- Original Message --------
Subject: Re: [lvs-users] question about LVS
From: Michael Schwartzkopff <misch@xxxxxxxxxxx>
To: LinuxVirtualServer.org users mailing list. 
<lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Date: 05/03/2010 02:34 PM

> Am Montag, 3. Mai 2010 14:31:32 schrieb Michiel van Es:
>> So to get it right:
>>
>> On the director:
>>   >>>>  net.ipv4.ip_forward = 1
>>
>> On the real servers:
>>   >>>>  net.ipv4.conf.all.arp_ignore = 1
>>   >>>>  net.ipv4.conf.eth0.arp_ignore = 1
>>   >>>>  net.ipv4.conf.all.arp_announce = 2
>>   >>>>  net.ipv4.conf.eth0.arp_announce = 2
>>
>> No forwarding on the real servers right?
>
> Correct

Thanks.

I still got the same results:

I only connect to server2 and never to server1, also 1 of the 2 times I 
get a 'No route to host':

michiel@wmichiele:~$ telnet 194.145.200.87 25
Trying 194.145.200.87...
Connected to 194.145.200.87.
Escape character is '^]'.
220 PCIntelligence mailserver 2 - mx2.pcintelligence.nl ESMTP
quit
221 PCIntelligence mailserver 2 - mx2.pcintelligence.nl
Connection closed by foreign host.
michiel@wmichiele:~$ telnet 194.145.200.87 25
Trying 194.145.200.87...
telnet: Unable to connect to remote host: No route to host
michiel@wmichiele:~$ telnet 194.145.200.87 25
Trying 194.145.200.87...
Connected to 194.145.200.87.
Escape character is '^]'.
220 PCIntelligence mailserver 2 - mx2.pcintelligence.nl ESMTP
quit
221 PCIntelligence mailserver 2 - mx2.pcintelligence.nl
Connection closed by foreign host.
michiel@wmichiele:~$ telnet 194.145.200.87 25
Trying 194.145.200.87...
telnet: Unable to connect to remote host: No route to host


>

_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/

LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users