|
Hi i bit new to LVS and today i tried to configure LVS to load balance my two
web servers. But i could not make it to work.
This is my configuration.
LVS Load balancer Real ip - 192.168.1.1
LVS Load balancer Virtual ip - 10.1.1.1 ( configured as eth0:1 )
Web Server-1 Real IP - 192.168.1.2
Web Server-2 Real IP - 192.168.1.3
# cat /etc/sysctl.conf
net.ipv4.ip_forward = 1
# cat /etc/ha.d/ldirectord.cf
checktimeout=3
checkinterval=5
autoreload=yes
logfile="/var/log/ldirectord.log"
quiescent=yes
virtual=10.1.1.1:80
fallback=127.0.0.1:80
real=192.168.1.2:80 gate
real=192.168.1.3:80 gate
service=http
request="test.html"
receive="test"
scheduler=wlc
protocol=tcp
checktype=negotiate
This is my ipvsadm -L output..
# ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.1.1.1:http wlc
-> 192.168.1.2:http Route 1 0 0
-> 192.168.1.3:http Route 1 0 0
Can some one tell what mistake i done. because i did not getting the web
page. my network is 192.168.1.0/24 network only. also i added 10 series ip
in client machine but still not got the web page.
--
View this message in context:
http://old.nabble.com/LVS-not-working-in-suse-linux-tp29334711p29334711.html
Sent from the LVS mailing list archive at Nabble.com.
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
| 