Re: [lvs-users] [SOLVED] Question about director (LVS-DR) & realservers

To: " users mailing list." <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: [lvs-users] [SOLVED] Question about director (LVS-DR) & realservers on different VLANs
From: "Net Ground - Frederique Rijsdijk" <frederique@xxxxxxxxxxxx>
Date: Wed, 24 Oct 2012 07:13:35 +0200
Well, it seems my case was not fully onderstood or looked at. My problem seems 
a feature, not a bug. It is because of the tagged vlan ports the LVS has. When 
a realserver acts as a client in my case, the incoming packet comes to eth0, 
when the LVS has already learned mac addresses via it's eth0.621 or eth0.608 

Setting sysctl net.ipv4.conf.eth0.rp_filter=0 solved my problem.
Please read the documentation before posting - it's available at: mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to

<Prev in Thread] Current Thread [Next in Thread>