|
The following patch set has been iterated upon in the lvs-devel mailing
list. I am submitting it here per Julian's advice for inclusion in the
net-next tree.
At Facebook we use ipip forwarding to deliver packets from our layer 4 ipvs
load balancers to our layer 7 proxies. Today these layer 7 proxies are all
dual stacked, so we can simply send v4 over v4 and v6 over v6. In the
future, we're going to have v6-only layer 7 load balancers (no internal v4
address). To deal with this, we'll forward v4 packets in v6 tunnels. This
patchset introduces the necessary functionality into ipvs.
The noteworthy limitation of this is that it is not compatible with state
synchronization, so great care is taken to keep these things mutually
exclusive.
This patchset includes changes that add an additional netlink attribute to
destinations and changes that plumb the destination address family through
parts of the code where it was assumed that it was the same as the service.
Finally, there's a change that updates the transmit functions for tunneling
to share common code and support v4 in v6 and vice versa.
Alex Gartrell (10):
ipvs: Add destination address family to netlink interface
ipvs: Supply destination addr family to ip_vs_{lookup_dest,find_dest}
ipvs: Pass destination address family to ip_vs_trash_get_dest
ipvs: Supply destination address family to ip_vs_conn_new
ipvs: prevent mixing heterogeneous pools and synchronization
ipvs: Pull out crosses_local_route_boundary logic
ipvs: Pull out update_pmtu code
ipvs: Add generic ensure_mtu_is_adequate to handle mixed pools
ipvs: support ipv4 in ipv6 and ipv6 in ipv4 tunnel forwarding
ipvs: Allow heterogeneous pools now that we support them
Julian Anastasov (10):
ipvs: address family of LBLC entry depends on svc family
ipvs: address family of LBLCR entry depends on svc family
ipvs: use correct address family in DH logs
ipvs: use correct address family in LC logs
ipvs: use correct address family in NQ logs
ipvs: use correct address family in RR logs
ipvs: use correct address family in SED logs
ipvs: use correct address family in SH logs
ipvs: use correct address family in WLC logs
ipvs: use the new dest addr family field
include/net/ip_vs.h | 15 +-
include/uapi/linux/ip_vs.h | 3 +
net/netfilter/ipvs/ip_vs_conn.c | 74 +++++--
net/netfilter/ipvs/ip_vs_core.c | 15 +-
net/netfilter/ipvs/ip_vs_ctl.c | 112 +++++++---
net/netfilter/ipvs/ip_vs_dh.c | 2 +-
net/netfilter/ipvs/ip_vs_ftp.c | 6 +-
net/netfilter/ipvs/ip_vs_lblc.c | 12 +-
net/netfilter/ipvs/ip_vs_lblcr.c | 12 +-
net/netfilter/ipvs/ip_vs_lc.c | 2 +-
net/netfilter/ipvs/ip_vs_nq.c | 3 +-
net/netfilter/ipvs/ip_vs_proto_sctp.c | 2 +-
net/netfilter/ipvs/ip_vs_proto_tcp.c | 2 +-
net/netfilter/ipvs/ip_vs_rr.c | 2 +-
net/netfilter/ipvs/ip_vs_sed.c | 3 +-
net/netfilter/ipvs/ip_vs_sh.c | 8 +-
net/netfilter/ipvs/ip_vs_sync.c | 13 +-
net/netfilter/ipvs/ip_vs_wlc.c | 3 +-
net/netfilter/ipvs/ip_vs_xmit.c | 388 +++++++++++++++++++++-------------
19 files changed, 453 insertions(+), 224 deletions(-)
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe lvs-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|
