|
----- Original Message -----
> From: "Khosrow Ebrahimpour" <khosrow.ebrahimpour@xxxxxxxxxxxxx>
> To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Sent: Jeudi 16 Janvier 2014 21:55:36
> Subject: Re: [lvs-users] ldirectord - Real server maintenance discarded by
> check
>
> On 01/14/2014 06:26 AM, Jeremy Clerc wrote:
> > Hello everyone,
> >
> > I have a question about ldirectord, we have a maintenance procedure
> > where we set the real server weight to 0 so connections finish
> > correctly, then we stop apache on the real server, sleep to let it
> > close all its fcgi, then start the server, and finally put the
> > weight back to 1.
> >
> > The problem is when we start the server, ldirectord makes his
> > check, sees the server is up and so add it back with a weight of
> > 1, 1s later it rereads its configuration and see that the server
> > should have a weight of 0, so it changes the weight back to 0.
> >
> > During this short time period the server takes few thousands
> > request and is not ready for it, it seems like a bug about the
> > check system.
> >
> > ldirectord has been upgraded to the latest version available on
> > github, also we have tested the "maintenacedir" configuration,
> > which behaves the same way as described above.
> >
> > Here is the configuration:
> >
> > # Global Directives
> > checktimeout=10
> > checkinterval=5
> > autoreload=yes
> > logfile="/var/log/ldirectord.log"
> > quiescent=yes
> > fork=yes
> > maintenancedir = /var/run/ldirectord_maintenance/
> >
> > virtual=....3:80
> > real=....72:80 gate
> > real=....73:80 gate
> > real=....74:80 gate
> > real=....75:80 gate
> > service=http
> > request="/fcgi-bin/envmy.fcgi"
> > receive="Mysql table test : OK"
> > scheduler=rr
> > protocol=tcp
> > checktype=negotiate
> >
> >
> > Do you have any suggestion, any idea ? I have not found any bug
> > related to this.
> >
> > Thank you all by advance,
> >
> > Regards,
> >
> > Jeremy
> >
> >
> That seems like a bug in ldirectord. But without going through the
> ldirectord code to fix this issue, you could add one more step to
> your
> procedures:
>
> 1. set server weight to 0
> 2. stop apache2
> ** 3. create a file in 'maintenancedir' to remove the real server
> from
> the VIP
>
> And to bring it back, you'd wait until your work is done before
> removing
> the maintenance file (as your last step).
>
> The caveat here is that as far as I know, ldirectord does not
> differentiate between real servers across VIPs. So if you have the
> same
> real server in multiple VIPs, creating the maintenance file will
> remove
> it from all those VIPs.
>
> Hope this helps,
>
> --
> Khosrow
>
>
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list -
> lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>
Hello,
Thank you for your answer.
We have been doing some testing today, and there is a solution but there is
still a bug.
If you look at my conf, we use "fork=yes", in the man it says :
fork = yes | no
If yes, ...... This will "increase response times to changes in real server
status" in configurations with many virtual servers. .......
So one of my colleague thought about changing fork to "no", and it worked, with
weight 0 or file in maintenance dir, server style stays with weight 0 after
apache restart and a good check.
It appears using fork, so it why I think there is still bug, I will fill an
issue on github.
Thank you again,
Jeremy
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
