[lvs-users] Keepalived + ipvsadm

[Bassem Mettichi <mettichi@xxxxxxxxx>]

Hello,

iam using keepalived ( keepalived-1.3.5-8.el7_6.x86_64)  + ipvsadm
( ipvsadm-1.27-7.el7.x86_64) installed on redhat 7, keepalived is used to
forward trafic to 2 freeradius servers. we are using round robin on
keepalived, we have two issues:

1- keepalived doen't send equal trafic to the 2 freeradious servers ( one
recieved more trafic than other despite weight is 1 for both servers)
2- when one of my freeradius servers is stopped keepalived remove it from
the pool and when this backend is started again i see that keepalived
detects that my backend is again up but it doesn't forward traffic to it,
it continues sending traffic only to the first server, i must restart
keepalived every time to solve this issue.

below the configuration:

global_defs
{
enable_script_security
script_user root root
}



vrrp_script chk_myscript {
  script       "/etc/keepalived/track.sh"
  interval 5   # check every 2 seconds
  fall 2       # require 2 failures for KO
  rise 2       # require 2 successes for OK
}


vrrp_instance VI_LB1 {
    state BACKUP
    interface eth1
    virtual_router_id 145
    priority 150
    unicast_src_ip 172.25.9.5
    unicast_peer {
        172.25.9.6
    }
    virtual_ipaddress {
172.25.9.8  dev eth1  # GGSN --> Radius
    172.25.8.8  dev eth2  #
172.25.9.7  dev eth1  #
172.25.8.9 dev eth2  # GATEWAY
    }


track_script {
    chk_myscript
  }


    track_interface {
        eth2           # Fault if down. eth2 is already monitored by VRRP.
    }

 nopreempt      # to avoid automatic switch
 notify "/etc/keepalived/notifyapache.sh"




}

virtual_server_group PORT1812 {
        172.25.9.8 1812
172.25.8.8 1812
}

virtual_server_group PORT1813 {
    172.25.9.8 1813
    172.25.8.8 1813
}




virtual_server 172.25.9.7 80 {
    delay_loop 10
    lb_algo rr
    lb_kind NAT
   # nat_mask 255.255.255.240
    #persistence_timeout 300
    #persistence_granularity 255.255.255.255
    protocol TCP

    real_server  172.25.8.1 8000 {
        weight 1
        HTTP_GET {
          url {
               path /alteon.html

                digest a7b8603f1c10e9229bea9e94c9645a53
              }
              connect_timeout 3
              nb_get_retry 3
              delay_before_retry 3
        }
    }


    real_server 172.25.8.2 8000 {
        weight 1
        HTTP_GET {
          url {
               path /alteon.html

                digest a7b8603f1c10e9229bea9e94c9645a53
              }
              connect_timeout 3
              nb_get_retry 3
              delay_before_retry 3
        }
    }
}



virtual_server group PORT1812 {
    delay_loop 10
    lb_algo rr
    lb_kind NAT
    #persistence_timeout 100   # de-activate for Active/Active
    protocol UDP

    real_server 172.25.8.3 1812 {
        weight 1
        MISC_CHECK {
          misc_path "/etc/keepalived/bespoke_healthcheck.sh
healthcheck1_srv1"
          misc_timeout 5
        }
    }
    real_server 172.25.8.4 1812 {
        weight 1
        MISC_CHECK {
          misc_path "/etc/keepalived/bespoke_healthcheck.sh
healthcheck1_srv2"
          misc_timeout 5
        }
    }
}

virtual_server group PORT1813 {
    delay_loop 10
    lb_algo rr
    lb_kind NAT
    #persistence_timeout 100   # de-activate for Active/Active
    protocol UDP

    real_server  172.25.8.3  1813 {
        weight 1
        MISC_CHECK {
          misc_path "/etc/keepalived/bespoke_healthcheck.sh
healthcheck1_srv1"
          misc_timeout 5
        }
    }
    real_server 172.25.8.4 1813 {
        weight 1
        MISC_CHECK {
          misc_path "/etc/keepalived/bespoke_healthcheck.sh
healthcheck1_srv2"
          misc_timeout 5
        }
    }
}



sysctl.conf keeplaived

net.ipv4.ip_forward = 1
net.ipv4.vs.expire_nodest_conn = 1
net.ipv4.vs.expire_quiescent_template = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.conf.eth1.rp_filter = 0
net.ipv4.conf.eth2.rp_filter = 0


sysctl.conf of freeradius server:

nothing configured here

thanks in advance
Bassem
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/

LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users