|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
net/batman-adv/Kconfig | 10 +--
net/ife/Kconfig | 2 +-
net/ipv4/Kconfig | 4 +-
net/ipv6/netfilter/Kconfig | 16 ++---
net/netfilter/Kconfig | 2 +-
net/netfilter/ipvs/Kconfig | 6 +-
net/rds/Kconfig | 4 +-
net/sched/Kconfig | 144 ++++++++++++++++++-------------------
8 files changed, 94 insertions(+), 94 deletions(-)
diff --git a/net/batman-adv/Kconfig b/net/batman-adv/Kconfig
index a3d188dfbe75..d5028af750d5 100644
--- a/net/batman-adv/Kconfig
+++ b/net/batman-adv/Kconfig
@@ -12,11 +12,11 @@ config BATMAN_ADV
depends on NET
select LIBCRC32C
help
- B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
- a routing protocol for multi-hop ad-hoc mesh networks. The
- networks may be wired or wireless. See
- https://www.open-mesh.org/ for more information and user space
- tools.
+ B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
+ a routing protocol for multi-hop ad-hoc mesh networks. The
+ networks may be wired or wireless. See
+ https://www.open-mesh.org/ for more information and user space
+ tools.
config BATMAN_ADV_BATMAN_V
bool "B.A.T.M.A.N. V protocol"
diff --git a/net/ife/Kconfig b/net/ife/Kconfig
index 6cd1f6d18f30..bcf650564db4 100644
--- a/net/ife/Kconfig
+++ b/net/ife/Kconfig
@@ -5,7 +5,7 @@
menuconfig NET_IFE
depends on NET
- tristate "Inter-FE based on IETF ForCES InterFE LFB"
+ tristate "Inter-FE based on IETF ForCES InterFE LFB"
default n
help
Say Y here to add support of IFE encapsulation protocol
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 974de4d20f25..03381f3e12ba 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -492,8 +492,8 @@ config TCP_CONG_WESTWOOD
wired networks and throughput over wireless links.
config TCP_CONG_HTCP
- tristate "H-TCP"
- default m
+ tristate "H-TCP"
+ default m
---help---
H-TCP is a send-side only modifications of the TCP Reno
protocol stack that optimizes the performance of TCP
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index 6120a7800975..69443e9a3aa5 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -170,13 +170,13 @@ config IP6_NF_MATCH_RT
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_SRH
- tristate '"srh" Segment Routing header match support'
- depends on NETFILTER_ADVANCED
- help
- srh matching allows you to match packets based on the segment
+ tristate '"srh" Segment Routing header match support'
+ depends on NETFILTER_ADVANCED
+ help
+ srh matching allows you to match packets based on the segment
routing header of the packet.
- To compile it as a module, choose M here. If unsure, say N.
+ To compile it as a module, choose M here. If unsure, say N.
# The targets
config IP6_NF_TARGET_HL
@@ -249,10 +249,10 @@ config IP6_NF_SECURITY
depends on SECURITY
depends on NETFILTER_ADVANCED
help
- This option adds a `security' table to iptables, for use
- with Mandatory Access Control (MAC) policy.
+ This option adds a `security' table to iptables, for use
+ with Mandatory Access Control (MAC) policy.
- If unsure, say N.
+ If unsure, say N.
config IP6_NF_NAT
tristate "ip6tables NAT support"
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 34ec7afec116..91efae88e8c2 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -697,7 +697,7 @@ config NF_FLOW_TABLE_INET
tristate "Netfilter flow table mixed IPv4/IPv6 module"
depends on NF_FLOW_TABLE
help
- This option adds the flow table mixed IPv4/IPv6 support.
+ This option adds the flow table mixed IPv4/IPv6 support.
To compile it as a module, choose M here.
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index f6f1a0d5c47d..5b672e05d758 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -135,7 +135,7 @@ config IP_VS_WRR
module, choose M here. If unsure, say N.
config IP_VS_LC
- tristate "least-connection scheduling"
+ tristate "least-connection scheduling"
---help---
The least-connection scheduling algorithm directs network
connections to the server with the least number of active
@@ -145,7 +145,7 @@ config IP_VS_LC
module, choose M here. If unsure, say N.
config IP_VS_WLC
- tristate "weighted least-connection scheduling"
+ tristate "weighted least-connection scheduling"
---help---
The weighted least-connection scheduling algorithm directs network
connections to the server with the least active connections
@@ -333,7 +333,7 @@ config IP_VS_NFCT
config IP_VS_PE_SIP
tristate "SIP persistence engine"
- depends on IP_VS_PROTO_UDP
+ depends on IP_VS_PROTO_UDP
depends on NF_CONNTRACK_SIP
---help---
Allow persistence based on the SIP Call-ID
diff --git a/net/rds/Kconfig b/net/rds/Kconfig
index 38ea7f0f2699..c64e154bc18f 100644
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
@@ -23,6 +23,6 @@ config RDS_TCP
This transport does not support RDMA operations.
config RDS_DEBUG
- bool "RDS debugging messages"
+ bool "RDS debugging messages"
depends on RDS
- default n
+ default n
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index b3faafeafab9..5b044ae6dc1e 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -324,7 +324,7 @@ config NET_SCH_CAKE
tristate "Common Applications Kept Enhanced (CAKE)"
help
Say Y here if you want to use the Common Applications Kept Enhanced
- (CAKE) queue management algorithm.
+ (CAKE) queue management algorithm.
To compile this driver as a module, choose M here: the module
will be called sch_cake.
@@ -730,8 +730,8 @@ config NET_CLS_ACT
config NET_ACT_POLICE
tristate "Traffic Policing"
- depends on NET_CLS_ACT
- ---help---
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This action replaces the existing policing
module.
@@ -740,9 +740,9 @@ config NET_ACT_POLICE
module will be called act_police.
config NET_ACT_GACT
- tristate "Generic actions"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Generic actions"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to take generic actions such as dropping and
accepting packets.
@@ -750,15 +750,15 @@ config NET_ACT_GACT
module will be called act_gact.
config GACT_PROB
- bool "Probability support"
- depends on NET_ACT_GACT
- ---help---
+ bool "Probability support"
+ depends on NET_ACT_GACT
+ ---help---
Say Y here to use the generic action randomly or deterministically.
config NET_ACT_MIRRED
- tristate "Redirecting and Mirroring"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Redirecting and Mirroring"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to allow packets to be mirrored or redirected to
other devices.
@@ -766,10 +766,10 @@ config NET_ACT_MIRRED
module will be called act_mirred.
config NET_ACT_SAMPLE
- tristate "Traffic Sampling"
- depends on NET_CLS_ACT
- select PSAMPLE
- ---help---
+ tristate "Traffic Sampling"
+ depends on NET_CLS_ACT
+ select PSAMPLE
+ ---help---
Say Y here to allow packet sampling tc action. The packet sample
action consists of statistically choosing packets and sampling
them using the psample module.
@@ -778,9 +778,9 @@ config NET_ACT_SAMPLE
module will be called act_sample.
config NET_ACT_IPT
- tristate "IPtables targets"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- ---help---
+ tristate "IPtables targets"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ ---help---
Say Y here to be able to invoke iptables targets after successful
classification.
@@ -788,9 +788,9 @@ config NET_ACT_IPT
module will be called act_ipt.
config NET_ACT_NAT
- tristate "Stateless NAT"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Stateless NAT"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to do stateless NAT on IPv4 packets. You should use
netfilter for NAT unless you know what you are doing.
@@ -798,18 +798,18 @@ config NET_ACT_NAT
module will be called act_nat.
config NET_ACT_PEDIT
- tristate "Packet Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Packet Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to mangle the content of packets.
To compile this code as a module, choose M here: the
module will be called act_pedit.
config NET_ACT_SIMP
- tristate "Simple Example (Debug)"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Simple Example (Debug)"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to add a simple action for demonstration purposes.
It is meant as an example and for debugging purposes. It will
print a configured policy string followed by the packet count
@@ -821,9 +821,9 @@ config NET_ACT_SIMP
module will be called act_simple.
config NET_ACT_SKBEDIT
- tristate "SKB Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "SKB Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to change skb priority or queue_mapping settings.
If unsure, say N.
@@ -832,10 +832,10 @@ config NET_ACT_SKBEDIT
module will be called act_skbedit.
config NET_ACT_CSUM
- tristate "Checksum Updating"
- depends on NET_CLS_ACT && INET
- select LIBCRC32C
- ---help---
+ tristate "Checksum Updating"
+ depends on NET_CLS_ACT && INET
+ select LIBCRC32C
+ ---help---
Say Y here to update some common checksum after some direct
packet alterations.
@@ -854,9 +854,9 @@ config NET_ACT_MPLS
module will be called act_mpls.
config NET_ACT_VLAN
- tristate "Vlan manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Vlan manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to push or pop vlan headers.
If unsure, say N.
@@ -865,9 +865,9 @@ config NET_ACT_VLAN
module will be called act_vlan.
config NET_ACT_BPF
- tristate "BPF based action"
- depends on NET_CLS_ACT
- ---help---
+ tristate "BPF based action"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to execute BPF code on packets. The BPF code will decide
if the packet should be dropped or not.
@@ -877,10 +877,10 @@ config NET_ACT_BPF
module will be called act_bpf.
config NET_ACT_CONNMARK
- tristate "Netfilter Connection Mark Retriever"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- depends on NF_CONNTRACK && NF_CONNTRACK_MARK
- ---help---
+ tristate "Netfilter Connection Mark Retriever"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ ---help---
Say Y here to allow retrieving of conn mark
If unsure, say N.
@@ -889,10 +889,10 @@ config NET_ACT_CONNMARK
module will be called act_connmark.
config NET_ACT_CTINFO
- tristate "Netfilter Connection Mark Actions"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- depends on NF_CONNTRACK && NF_CONNTRACK_MARK
- help
+ tristate "Netfilter Connection Mark Actions"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ help
Say Y here to allow transfer of a connmark stored information.
Current actions transfer connmark stored DSCP into
ipv4/v6 diffserv and/or to transfer connmark to packet
@@ -906,21 +906,21 @@ config NET_ACT_CTINFO
module will be called act_ctinfo.
config NET_ACT_SKBMOD
- tristate "skb data modification action"
- depends on NET_CLS_ACT
- ---help---
- Say Y here to allow modification of skb data
+ tristate "skb data modification action"
+ depends on NET_CLS_ACT
+ ---help---
+ Say Y here to allow modification of skb data
- If unsure, say N.
+ If unsure, say N.
- To compile this code as a module, choose M here: the
- module will be called act_skbmod.
+ To compile this code as a module, choose M here: the
+ module will be called act_skbmod.
config NET_ACT_IFE
- tristate "Inter-FE action based on IETF ForCES InterFE LFB"
- depends on NET_CLS_ACT
- select NET_IFE
- ---help---
+ tristate "Inter-FE action based on IETF ForCES InterFE LFB"
+ depends on NET_CLS_ACT
+ select NET_IFE
+ ---help---
Say Y here to allow for sourcing and terminating metadata
For details refer to netdev01 paper:
"Distributing Linux Traffic Control Classifier-Action Subsystem"
@@ -930,9 +930,9 @@ config NET_ACT_IFE
module will be called act_ife.
config NET_ACT_TUNNEL_KEY
- tristate "IP tunnel metadata manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "IP tunnel metadata manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to set/release ip tunnel metadata.
If unsure, say N.
@@ -941,9 +941,9 @@ config NET_ACT_TUNNEL_KEY
module will be called act_tunnel_key.
config NET_ACT_CT
- tristate "connection tracking tc action"
- depends on NET_CLS_ACT && NF_CONNTRACK && NF_NAT
- help
+ tristate "connection tracking tc action"
+ depends on NET_CLS_ACT && NF_CONNTRACK && NF_NAT
+ help
Say Y here to allow sending the packets to conntrack module.
If unsure, say N.
@@ -952,16 +952,16 @@ config NET_ACT_CT
module will be called act_ct.
config NET_IFE_SKBMARK
- tristate "Support to encoding decoding skb mark on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb mark on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBPRIO
- tristate "Support to encoding decoding skb prio on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb prio on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBTCINDEX
- tristate "Support to encoding decoding skb tcindex on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb tcindex on IFE action"
+ depends on NET_ACT_IFE
config NET_TC_SKB_EXT
bool "TC recirculation support"
--
2.17.1
|
