|
Hey all:
I'm trying to do the following - I have a Linux box as my gateway between my
cablemodem and my LAN. I'd like to send port 80 from my gateway (external
side: eth1 24.226.X.Y where X and Y are the remainder of my address) to 6
internal hosts (named node1 - node6 at addresses 192.168.3.201 - 206 )
I've issued the following commands:
ipfwadm -F -a m -S 24.226.X.Y/32 -D 0.0.0.0/0
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.201:80
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.202:80
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.203:80
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.204:80
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.205:80
ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.206:80
However, all off my attempts to access the web-page will not work (httpd is
not running on the gateway)...
ippfvsadm -L will show that there are connections...
The IPmasq all seems to work as systems can get out onto the 'net no
problem, and the GW can access the internal systems as well...
So what am I doing wrong?
Also, does anyone have an example script for something similar to this with
both their IPmasq and VS stuff in it?
Regards,
Ron Harwood
|
