|
...but it still doesn't work. :(
-----Original Message-----
From: Ron Harwood <harwoodr@xxxxxxxxxxxx>
To: linux-virtualserver@xxxxxxxxxxxx <linux-virtualserver@xxxxxxxxxxxx>
Date: Friday, January 01, 1999 2:30 PM
Subject: Re: What am I doing wrong?
>Correction it's:
>
> ipfwadm -F -am -S 192.168.3.0/24 -D 0.0.0.0/0
>
>:)
>-----Original Message-----
>From: Ron Harwood <harwoodr@xxxxxxxxxxxxxxxx>
>To: linux-virtualserver@xxxxxxxxxxxx <linux-virtualserver@xxxxxxxxxxxx>
>Date: Friday, January 01, 1999 1:18 PM
>Subject: VS: What am I doing wrong?
>
>
>>Hey all:
>>
>>I'm trying to do the following - I have a Linux box as my gateway between
>my
>>cablemodem and my LAN. I'd like to send port 80 from my gateway (external
>>side: eth1 24.226.X.Y where X and Y are the remainder of my address) to 6
>>internal hosts (named node1 - node6 at addresses 192.168.3.201 - 206 )
>>
>>I've issued the following commands:
>>
>>ipfwadm -F -a m -S 24.226.X.Y/32 -D 0.0.0.0/0
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.201:80
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.202:80
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.203:80
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.204:80
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.205:80
>>ippfvsadm -A -t 24.226.X.Y:80 -R 192.168.3.206:80
>>
>>However, all off my attempts to access the web-page will not work (httpd
is
>>not running on the gateway)...
>>
>>ippfvsadm -L will show that there are connections...
>>
>>The IPmasq all seems to work as systems can get out onto the 'net no
>>problem, and the GW can access the internal systems as well...
>>
>>So what am I doing wrong?
>>
>>Also, does anyone have an example script for something similar to this
with
>>both their IPmasq and VS stuff in it?
>>
>>Regards,
>>
>>Ron Harwood
>>
>>
>
>
|
