|
"Brian L. DiMambro" wrote:
>
> Hi all.
>
> I'm attempting to use the piranha GUI config tool. I have RH6.2 with the
> latest piranha packages ... 0.4.14-1 .. and my system is running apache
> with php3.
>
> I get ....
>
> There was an error opening or creating the lvs.cf configuration file
> The most likely cause is that the file permissions are incorrect.
> They should be set as follows
>
> -rw-rw-r-- 1 piranha nobody 0 Mar 1 12:00 /etc/lvs.cf
> You can achieve this by issuing the following 3 commands as root
> touch /etc/lvs.cf
> chmod 664 /etc/lvs.cf
> chown piranha.nobody /etc/lvs.cf
>
> My lvs.cf ....
>
> 0 -rw-rw-r-- 1 piranha nobody 0 Jun 2 22:32 lvs.cf
>
> I have tried the following:
>
> 1. remove the lvs.cf and try to have the GUI build ... didn't work
>
> 2. rebuild using method from GUI message ... didn't work.
>
> Any suggestions ....
I have forwarded your message to the appropriate person. Could you
also log it in http://bugzilla.redhat.com/bugzilla so that it can
be tracked and so others that might experience this can find
the (eventual) soplution?
Thanks
--
Keith Barrett
Red Hat Inc. HA Team
kbarrett@xxxxxxxxxx
| 