|
Hi,
it's me ;-) ! After getting work my LVS Cluster, I try to configure FOS!
Now my question: The Primary FOS server seems to work unnormal. The hdd is
working all the time, and the message log says the following:
...
Oct 20 11:11:17 clu-lnx-01 pulse[6818]: fos process exited -- restarting it
Oct 20 11:11:17 clu-lnx-01 pulse[6818]: running command "/usr/sbin/fos"
"--active" "-c" "/etc/lvs.cf" "--nofork"
Oct 20 11:11:17 clu-lnx-01 fos[7072]: Stopping local services (if any)
Oct 20 11:11:17 clu-lnx-01 pulse[7073]: running command "/sbin/ifconfig"
"eth0:1" "192.168.126.65" "up"
Oct 20 11:11:17 clu-lnx-01 pulse[7071]: running command "/usr/sbin/send_arp"
"-i" "eth0" "192.168.126.65" "0050DA1CBDC6" "192.168.126.255" "ffffffffffff"
Oct 20 11:11:19 clu-lnx-01 pulse[7050]: gratuitous fos arps finished
...
which is repeating in 2 seconds intervall.
The FTP-service is working, but the firtst connect takes nearly a minute.
My lvs.cf:
#
# Globale Definitionen des Clusters
#
service = fos
primary = 192.168.126.66
backup = 192.168.126.67
backup_active = 1
heartbeat = 1
heartbeat_port = 1050
keepalive = 2
deadtime = 6
rsh_command = rsh
network = nat
nat_router = 192.168.1.254 eth1:1
#
# Per-service Definitionen
#
failover ftpcluster {
active = 1
address = 192.168.126.65 eth0:1
port = 21
#send = "\n"
#start_cmd = ""
#stop_cmd = ""
}
Any suggestions?
Thanks,
Thomas Hoelsken
IT-TM-KS
C&N Touristic AG
Zimmersmühlenweg 55
61440 Oberursel
GERMANY
Phone: +49-6171-651198
Fax: +49-6171-6541198
Mail: thomas.hoelsken@xxxxxx
|
