|
i have two computer to test the linuxvirtual server.use the LV_NAT mode.
the two server has install rh62,and the one i install rh62 cluster.so i don't
need to install the kernel patch.the other has install apache server as the
real server.the two computer link each other with a hub.and the two computer
has only one ethnet.
the director has the ip 10.0.0.1,and i alias the ethnet 0 another ip eth0:0
200.200.200.54
the realserver has the ip 10.0.0.10 and i set the default gw is 10.0.0.1.
i type follow commands on the director
echo "1" > /proc/sys/net/ipv4/ip_forward
ipchains -A forward -j MASQ -s 10.0.0.0/24 -d 0.0.0.0/0
ipvsadm -A -t 200.200.200.54:80 -s wlc
ipvsadm -a -t 200.200.200.54:80 -R 10.0.0.10
and i in the 200.200.200.5 use lynx http://200.200.200.54/
first i successed ,but the another request to the http://200.200.200.54.
it refuse to disconnect.and i used the sniffit in the director to detect the ip
packets from the source 10.0.0.10,i see when i send the package has success to
translate to the realserver.but the request packet is null.
but i can't see the access log to this apache server .thanks a lot.
|
