|
Ivan Figueredo wrote:
>
> ----- Original Message -----
> From: "Joseph Mack" <mack.joseph@xxxxxxx>
> To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
> Sent: Thursday, January 18, 2001 6:05 AM
> Subject: Re: My first attempt
>
> > Ivan Figueredo wrote:
> >
> > > I am not sure what I am doing wrong. I thought I saw a post about LVS
> not
> > > working if all machines are on the same (sub)net, but I am not sure...
> >
> > yes you can do it, but it's a lot easier if you have the client and the
> > real-servers
> > are on different networks
>
> So, If *add* to eth0 the IP address, say, 192.168.0.1, then will that will
> do? Also, do I have to do *anything* on the "real" server(s) - I didn't
> touch them...
have the client on 192.168.2.0/24 and the real-server on 192.168.2.0.
See the HOWTO
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
