|
Julian,
----- Original Message -----
From: "Julian Anastasov" <ja@xxxxxx>
To: "Ivan Figueredo" <idf@xxxxxxxxxxxxxx>
Cc: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Saturday, January 20, 2001 5:55 AM
Subject: Re: Setting up a one network VS-NAT LVS
>
> Hello,
>
> On Sat, 20 Jan 2001, Ivan Figueredo wrote:
>
> > Again, I can do this on the director and realserver, but not client. Is
this
> > necessary on NT client?
>
> No :) Ivan, Don't worry for these output, I see Joe have this setup
> working.
OK - Is there a web site or book that you can recommend that shows how to
debug/understand TCP/IP packets?
>...BTW, the same level of security can be achieved using LVS/DR
> where the real servers have private addresses as in the NAT setup. May
> be Joe have this info in the HOWTO.
You have anticipated my next question! Thx. this IS the way I will
eventually need to set it up, as REAL IP addresses on the Internet are
scarce.
Regards,
Ivan
> > Ivan
>
>
> Regards
>
> --
> Julian Anastasov <ja@xxxxxx>
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|
