|
On NT _server_,
there is a uSoft supplied packet capture utility as well.
/sG
-----Original Message-----
From: Ivan Figueredo [mailto:idf@xxxxxxxxxxxxxx]
Sent: Saturday, January 20, 2001 11:37 AM
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: Setting up a one network VS-NAT LVS
Steve,
Thx.I will look into this book. Also, I found windump at
http://netgroup-serv.polito.it/windump/
Regards,
Ivan
----- Original Message -----
From: "Steve Gonczi" <Steve.Gonczi@xxxxxxxxxxxxxxxxxx>
To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Saturday, January 20, 2001 10:23 AM
Subject: RE: Setting up a one network VS-NAT LVS
>
> >OK - Is there a web site or book that you can recommend that shows how to
> >debug/understand TCP/IP packets?
>
> -W. Richard Stevens: TCP-IP Illustrated, Vol 1.
> (this is a good intro into packet layouts and protocol basics)
> -tcpdump MAN pages
> Note, that there is a working tcpdump (a.k.a windump)
> for NT4 and W2K as well
>
>
>
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
