|
On Wed, May 02, 2001 at 09:20:57PM +0800, john-dean wrote:
>
> Dear All:
>
> I ask for the help for the implementation:
>
> A lvs box acts as a layer4 switch by LVS-NAT
> however there are two FTP real-servers with different
> content exclusively (for some reason,they can not use
> role-based-control to handle in one server to see different content) .
>
> two users with the same IP(also from another NAT area and the IP is
> dynamic) must go to the two different FTP servers, The problem is:
> Can we use some identify or proxy method to dynamic change the lvs table to
> reflect the different path ?
> best regards...
Is there are reason they _have_ to use the same IP address. If you
can use different IP addresses then you can set up two virtual services
and have a different back-end FTP server in each. Otherwise, as per a
different mail to the list you will need somthing more than layer-4
switching.
--
Horms
horms@xxxxxxxxxxxx
http://vergenet.net/~horms/
|
