|
Thanks to everybody. I have been able to get everything
working well now. My main problem was that I had forgotten to set netmask
on the lo:0 device. (hence i was stuck in a loop where all requests would
come in but none would go out. After i fixed that I was able to use the information
given by all of you to make it work.
Nate
-------- Original Message --------
I have a complex problem. I have setup nat before and have been very
happy. However I am now trying to get the following configuration to
work (with no success)
2 servers both running redhat 6.2 with all the latest patches. Both
servers are going to act as lvs load balancers and as real servers for
apache. I am running kernel 2.2.19 with the latest patch. Also I have
followed all the instructions for direct routing (I was told this is the
only way to do this setup) from
http://www.linuxvirtualserver.org/VS-DRouting.html w/ hidden device. And
so far I haven't been able to track why my requests to the server just
seem to disappear ( ping to the virtual address doesn't even work ). As
a note I have setup lo:0 according to those instructions on both servers
with no luck as well. And if it makes any difference I am using the
pulse daemon that comes from redhat.
Has anybody ever done this or have some points on where to look. Thanks
in advance for you help
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
