Be my guest... :-)
And please remember this is just the first attempt... :-)
You must have an IPVS patched kernel and the compiled IPVSADM.
http://166.90.160.143/lvs_nat_mgr.tar
Any comments will be welcome.
Carlos Maynard Jr.
carlos@xxxxxxxxxxxxxxxx
----- Original Message -----
From: "Laurent LE" <lle@xxxxxxxxxx>
To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Saturday, June 30, 2001 10:05 PM
Subject: Re: Failover support
> I will be happy to test it.
>
> Laurent Le
>
>
> ----- Original Message -----
> From: "Carlos Maynard" <carlos@xxxxxxxxxxxxxxxx>
> To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
> Sent: Saturday, June 30, 2001 10:43 AM
> Subject: Re: Failover support
>
>
> > I am developing a Python Script for Failover support on my NAT LVS.
> > It's working pretty well so far and it's a very short script.
> >
> > It works based on a configuration file, and configures LVS based on it.
> > and then starts monitoring the realservers.
> >
> > I'd be more than happy to share it, in exchange of feedbacks to improve
> it.
> >
> > Best regards,
> >
> > Carlos Maynard Jr.
> >
> >
> >
> > _______________________________________________
> > LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> > Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> > or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
|