|
sean zheng wrote:
>
> Hi,
> The following is a test config file /etc/lvs.cf
> primary = 10.2.0.25
> service = lvs
> rsh_command = rsh
> backup_active = 1
> backup = 10.2.0.26
> heartbeat = 0
> heartbeat_port = 1050
> keepalive = 2
> deadtime = 10
> network = nat
> nat_router = 192.168.102.1 eth1:1
> virtual vstest {
> active = 1
> address = 10.2.0.28 eth0:1
> port = 80
> send = "GET / HTTP/1.0\r\n\r\n"
> expect = "HTTP"
> load_monitor = uptime
> scheduler = rr
> protocol = tcp
> timeout = 6
> reentry = 15
> server vstest1 {
> address = 192.168.102.10
> active = 1
> weight = 1000
> }
> server vstest2 {
> address = 192.168.102.11
> active = 1
> weight = 1000
> }
> }
>
> Please be noted, the address for the virtual machine is 10.2.0.28
> which is a class A ip address. When
> the lvs starts working, it uses "ifconfig eth0:1 10.2.0.28 up" to set the ip
> address, unfortunately Linux use a
> default netmask 255.0.0.0 for this interface which is different from our
> netmask (our netmark is 255.255.0.0)
> My question is how to sepecify a netmaks for this interface.
> Could someone help me out. Thanks
ifconfig eth0:1 10.2.0.28 netmask 255.255.255.0
or whatever....
>
> Regards,
> sean
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
