|
charles huang wrote:
>
#----------lvs_dr.conf----------------------------------------
LVSCONF_FORMAT=1.1
LVS_TYPE=VS_DR
INITIAL_STATE=on
CLEAR_IPVS_TABLES=yes
VIP=eth0:0 61.131.4.187 255.255.255.255 61.131.4.187
DIP=eth0 61.131.4.170 61.131.4.128 255.255.255.192 61.131.4.191
#SERVICE=t http wrr 61.131.4.171,2 61.131.4.172,2 61.131.4.173,2
SERVICE=t telnet wrr 61.131.4.171,2 61.131.4.172,2
SERVER_VIP_DEVICE=dummy0:0
SERVER_NET_DEVICE=eth0:17
SERVER_GW=61.131.4.129
#----------end lvs_dr.conf------------------------------------
I got your setup to work with the above conf file. The IP's are the same
as your originals.
Because I set it up over my 192.168.1.0 network, I put all your IP
onto aliases (eg eth0:17).
Otherwise there's no changes.
I'll send you separately, the configure script v0.9.3 that I used.
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
