Never mind, I figured it out. According to the LVS docs for an NT system your
suppose to use a class A netmask (255.0.0.0) for your loopback adapter. I
changed it to 255.255.255.128 with my default gateway and it started working
ok. Going to the RIP address didn't work either until I set the loopback
correctly.
>>> Simpsonb@xxxxxxxxxxxxxxxxxxxxxx 09/10/01 01:58PM >>>
Hi,
This is my first time setting this up I was able to get a single director up
and running with IPVS 0.9.3. I know this isn't the stable version but I was
eventually hoping to use the state updates with two directors later on as I
learn more. So far I can connect to the two win2k real servers through a
virtual IP on the director via LVS-dr when I'm in the same subnet (From Client
C). This works great. But I can't connect to any of the other servers from
another subnet (Clients A and B). Client A and B can get to both Real servers
RIP. Does this sound like a routing issue? Maybe because my DMZ uses a
255.255.255.128 subnet mask it causes an issue? Here's a diagram of my setup.
________ ________
| |
| |
| client A |-(207.156.7.254/255.255.255.240)
| client B |-(172.16.21.82/255.255.0.0)
|________| |________|
|
|
(Firewall/External NIC) (207.156.7.251/255.255.255.240)
(Firewall/Internal NIC) (172.16.21.103/255.255.0.0)
|
|
------------------------------------------------------------------------------------------------------------
|
(Firewall/DMZ NIC)(207.156.7.1/255.255.255.128)
|
________ |
| | | VIP=207.156.7.43/255.255.255.128
(eth0:0)
| director |------- DIP=207.156.7.115/255.255.255.128 (eth0)
|________| |
| _______
| | |
|--------------------| client C
|-(207.156.7.116/255.255.255.128)
| |_______|
|
-----------------------------------------------------
| |
| |
RIP1=207.156.7.41/255.255.255.128 RIP2=207.156.7.42/255.255.255.128
VIP=207.156.7.43/255.0.0.0 VIP=207.156.7.43/255.0.0.0
(loopback)
__________ _________
| | |
|
| realserver | | realserver |
|_________| |_________|
Brett Simpson
Internet Administrator for Hillsborough County
(813) 301-7144
simpsonb@xxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|