|
Hi,
Ah I seem to have discovered the problem.
The rc.lvs_dr script was killing/overwriting the default gateway.
Does anyone know how to set the default gateway from the command line?
I am doing it by restarting the network after running the rc.lvs_dr script
at the minute, a bit kludgey to say the least.
Cheers,
Jezz.
> -----Original Message-----
> From: Palmer J.D.F. [mailto:J.D.F.Palmer@xxxxxxxxxxxxx]
> Sent: 15 March 2002 13:30
> To: 'lvs-users@xxxxxxxxxxxxxxxxxxxxxx'
> Subject: FW: LVS working :-) But not with Squid :-(
>
> Hi,
>
> I finally managed to get time enough to spend getting my LVS cluster
> working, finally.
>
> Well it works fine with http, but not with squid.
> What I mean by this is I get network unreachable back from the squid boxes
> (on the squid generated errors), the actual load balancing works okay.
>
> I have 1 director and 3 realservers.
>
> I used Joseph Mack's configuration tool.
> Here is my configure script, can anyone spot what is wrong?
>
>
> LVSCONF_FORMAT=1.1
> LVS_TYPE=VS_DR
> INITIAL_STATE=on
> CLEAR_IPVS_TABLES=yes
> #VIP line format - device[:alias] IP netmask broadcast
> #To help avoid namespace collisions with other VIPs, I set alias=last
> number
>
> #of VIP (here 110).
> #note: for VS-DR, VS-Tun, the IP is in a /32 network
> VIP=eth0:110 137.44.1.68 255.255.255.0 137.44.1.68
> #DIP line format - device[:alias] IP network netmask broadcast
> DIP=eth0:9 137.44.1.25 137.44.1.0 255.255.255.0 137.44.1.255
> #no DIRECTOR_GW for VS-DR or VS-Tun
> #DIRECTOR_GW=
> #SERVICE line format - proto port scheduler IP[,weight] [IP[,weight]]
> SERVICE=t 3128 wlc 137.44.1.30,1 137.44.1.31,1 137.44.1.48,1
> #SERVICE=t http wlc 137.44.1.30,1 137.44.1.31,1 137.44.1.48,1
> SERVER_VIP_DEVICE=lo:110
> SERVER_NET_DEVICE=eth0
> #SERVER_GW - packets with src_addr=VIP, dst_addr=0/0 are sent to SERVER_GW
> #to be forwarded to the outside world.
> #For standard VS-DR,VS-Tun, this must _NOT_ be the director.
> #For Julian's martian modification (see the HOWTO), it will be the
> director.
> #If you don't know about the martian modification, you aren't using it.
> #The script will not neccesarily set up the SERVER_GW as the real-
> servers's
> default gw.
> SERVER_GW=137.44.1.254
>
> Thanks,
> Jezz Palmer.
>
> ****************************************
> Jezz Palmer.
> Internet Systems Officer.
> Library and Information Services
> University of Wales, Swansea
> Singleton Park
> Swansea
> SA2 8PP
> Tel 01792 513260
> ****************************************
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
