LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

RE: problems with ipvs 1.0.1 and kernel 2.4.18

To: "'Tinu Patel'" <tinu.patel@xxxxxxxxxxxx>, "'lvs-users@xxxxxxxxxxxxxxxxxxxxxx'" <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: RE: problems with ipvs 1.0.1 and kernel 2.4.18
From: Jimmy Yeung <JYeung@xxxxxxxxxx>
Date: Mon, 25 Mar 2002 15:34:04 -0500
ln -s /usr/src/linux-2.4 /usr/src/linux
 
Download ext3 patch for 2.4.18 here.
Patch it to your source before rebuild kernel.
 
I can't remember exactly ... but in Kernel menu, click on "file system xxx...".  There's only one of the option with the word "ext3" there.  Check it then rebuild.
 
Jimmy
 -----Original Message-----
From: Tinu Patel [mailto:tinu.patel@xxxxxxxxxxxx]
Sent: Monday, March 25, 2002 3:23 PM
To: JYeung@xxxxxxxxxx
Subject: RE: problems with ipvs 1.0.1 and kernel 2.4.18

How do I make that link?  Currently under /usr/src I only have a “linux”directory.  Also in the kernel compilation from which menu do I choose “ext3” support?

 

Thanks

 

-----Original Message-----
From: Jimmy Yeung [mailto:JYeung@xxxxxxxxxx]
Sent: Monday, March 25, 2002 1:57 PM
To: 'lvs-users@xxxxxxxxxxxxxxxxxxxxxx'
Subject: RE: problems with ipvs 1.0.1 and kernel 2.4.18

 

I've been there ... you'll need the ext3 fs patch to your source (symbolic link from /usr/src/linux-2.4 to /usr/src/linux) ... then rebuild the kernel.

Aren't you need to copy the System.map file to root directory?

Jimmy

-----Original Message-----
From: Tinu Patel [mailto:tinu.patel@xxxxxxxxxxxx]
Sent: Monday, March 25, 2002 2:55 PM
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: problems with ipvs 1.0.1 and kernel 2.4.18

 

Hi all

I am having problems getting this to work.  I am using RH 7.2.  The following are exact steps of what I did:

1) downloaded and untarred kernel 2.4..18 in /usr/src
2) applied the linux-2.4.18-ipvs-1.0.1.patch
3) cd /usr/src/linux
4) did "make mrproper"
5) "make menuconfig"
6) selected all the options for kernel 2.4.x as shown on the mini HowTo guide
7) "make dep"
8) "make clean"
9) "make bzImage"
10)  "make modules"
11)  "make modules_install"
12)  "make install"
13)  "cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.18"
14) updated lilo.conf
15) ran "lilo"
16) reboot

The thing is that when I reboot, it first complains about "fs type ext3 not supported by kernel", then something about "kudzu" not being present, then there are another couple of failed options and then it just hangs on "Starting System logger" and says that the file doesn't exist.  I am really clueless (its my 1st time with installing LVS) as to why I'm getting these errors.  I have tried numerous other options (I have probably recompiled 10 times), but had no success.  Any help would be greatly appreciated....

Thanks
 

_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users

<Prev in Thread] Current Thread [Next in Thread>