|
Hi Joe,
Good holiday?
I've been doing other stuff on the whole but I've had two attempts at
getting the ipvsadm status synching to work, not entirely successful I must
say.
It does seem to work sometimes if you leave it long enough. Not always
though.
Basically if I down eth0 on Director1 whilst the synch daemon isn't running
then control gets passed to Director2, albeit with no client->realserver
info, this transition happens pretty much immediately think it takes about
15 seconds for it to realise then another 10 seconds or so to run
everything.
Then on bringing the eth0 on Director1 back up the transition back is
seamless. And all of my monitoring scripts work and send me the relevant
emails
If I repeat with the synch daemon running heartbeat seems to make the backup
director active, but it doesn't work, IE no web access, and my monitoring
scripts don't work. Then on bringing eth0 back up on director1 it carries
on working.
Once or twice after a few minutes wait after initially downing director1
eth0 director2 did spring to life, but after the persistence period so I
imagine that any status info would have expired anyway.
I'll persevere for a bit longer, beginning to grate a little though.
I'm going to start afresh tomorrow with a new plan, it's quite tricky as you
need to have a few clients to ensue that they are all still
connected/directed to the same realserver.
Oh as long as England don't lose to Brazil, I'll be in a miserable mood if
they lose and prolly do very little all day.
Enough babble, I'll write tomorrow.
Cheers,
Jezz.
|
