|
Hi,
From the HOWTO chapter 4, one of the method is to use fwmark to solve the arp
problem. But in that chapter and the fwmark chapter (8), I can't find on how
to do that.
I also found this statement:
"Alternately if the router has several NICs, use one for the director and
another for the realservers. Route the VIP to the director."
Does this mean that I just run "ip route add VIP dev eth0" where eth0 is
connected to the director, and eth1 is connected to the hub to the
realservers?
I would have no problem if it's as above, rather than patching all the
realservers... But is there any downside to using this method?
Thank you
|
