|
Try this again, sorry for spamming the list, mailclient problems.
With the new release of hearbeat (from UltraMonkey 2.0.1) what is the
preferred format for the haresources?
1.)
Director2 IPaddr::66.128.191.4/24/eth0:1
ldirectord::/usr/local/etc/ha.d/ldirectord.cf EmailAdmin
Director2 IPaddr::66.128.191.5/24/eth0:2
ldirectord::/usr/local/etc/ha.d/ldirectord.cf EmailAdmin
Director2 IPaddr::66.128.191.6/24/eth0:3
ldirectord::/usr/local/etc/ha.d/ldirectord.cf EmailAdmin
Director2 IPaddr::66.128.191.7/24/eth0:4
ldirectord::/usr/local/etc/ha.d/ldirectord.cf EmailAdmin
2.)
Director2 IPaddr::66.128.191.4/24/eth0:1 IPaddr::66.128.191.5/24/eth0:2
IPaddr::66.128.191.6/24/eth0:3 IPaddr::66.128.191.7/24/eth0:4
ldirectord::/usr/local/etc/ha.d/ldirectord.cf EmailAdmin
(this is all one line)
AJ
-----Original Message-----
From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Horms
Sent: Thursday, June 05, 2003 10:12 AM
To: LinuxVirtualServer.org users mailing list.
Subject: Re: Fail Over
On Thu, Jun 05, 2003 at 08:45:09AM -0500, AJ Lemke wrote:
> I am using version 0.4.c from your Ultramonkey product. Thanks for the
> info I will check out that list.
That is quite an old release. You should probably
look at using 1.0.2 (1.0.3 is pending but has been
held up by a bug).
--
Horms
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
