|
David Young wrote:
>
> My mail should wrap automatically. I don't know why my mail is not
> wrapping.
> I'll try and make my paragraphs short.
fine now
> Client 1 IP: 10.1.1.1
> Client 2 IP: 192.168.0.1
> LVS eth0: 10.1.1.254
> LVS eth1: 192.168.0.254
>
> LVS eth2: 10.10.10.254
> Real Servers: 10.10.10.1
> Basically, can I have 2 separate Virtual IPs referencing the same real
> server? The LVS documents don't really address this type of scenario.
As I see it, this is a routing problem. You have clients on xxx.xxx.xxx.xxx
and on yyy.yyy.yyy.yyy and you want both of them to get to VIP, which is on
the outside of the director. If this is your problem, then all you need to
do is to put routes (a router) somewhere telling people where VIP is.
Is this what you're asking?
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
SAIC, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
|
