|
Ok thanks for the reply, this is not a major problem for this setup anyway,
I was just curious.
-----Original Message-----
From: lvs-users-bounces+dean.pullen=virtuefusion.com@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces+dean.pullen=virtuefusion.com@xxxxxxxxxxxxxxxxxxxxx
g] On Behalf Of Joseph Mack
Sent: 26 April 2004 12:18
To: LinuxVirtualServer.org users mailing list.
Subject: Re: Can't ping outside of LAN after script execution
Dean Pullen wrote:
>
> Before I run the lvs_dr.conf, internet addresses are
> pingable/accessible, after the script is run I can no longer ping
> external addresses.
This is a feature
see
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-DR.html#Pearthree
unfortunately this feature has caused much consternation amongst users and
I regret now that I didn't put in a switch to turn it off. You can add a
default
gw by hand if you want. If you want to see the state of your director,
you'll need to
use the iproute2 tools rather than ifconfig/route.
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
SAIC, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
