Re: [RFC PATCH] Using LVS as a way to provide load-balanced internet

[Joseph Mack NA3T <jmack@xxxxxxxx>]

On Fri, 29 Jul 2005, Ludo Stellingwerff wrote:

> Yes I have also send a patch for ipvsadm, introducing the reinject
> director option.
OK



> > > And because of the reinjection you can normally SNAT/MASQ
> > > traffic:
> >
> > Not sure what's going on here. dev1/2 are the output devices on the
> > director and have private addresses? You're then NAT'ing these
> > private addresses to what? Presumably the address on the gateway?
> Time for asscii art:
ascii art has a hard time making it through e-mail.
Best to have only 40chars or so. Here's my
understanding of your diagram.


          LAN
           |
       (private)
           |
          eth0 (private)
           |
       Director
       |      |
      eth1   eth2 (public)
       |      |
      gw_1   gw_2 (eg modem, router, wan)
       |      |
      ISP1   ISP2


Is this correct?

Joe

--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml 
Homepage http://www.austintek.com/ It's GNU/Linux!