LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

RE: Regd ipvsadm ouput

To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: RE: Regd ipvsadm ouput
From: merdan.atajanov@xxxxxxxxxxxxxx
Date: Thu, 17 Nov 2005 15:29:43 +0900
You have to setup virtual IP VIP on realservers as well.
You can configure it as alias on other devices eth0, lo or like dummy interface.
Do not forget about ARP problem.

Quoting Vijay K <vijay_k@xxxxxxxxxxxxx>:

Hi
Virtual ip is setup by haresources file and the taking over of virtual ip
between the two directors on failover is working fine

Apart from downloading and running the ultramonkey rpms should something
else be done with ipvsadm for it to notice realservers.
I have the ldirectord config file which has the realservers listed and its
running on the active directord


Regds
Vijay
-----Original Message-----
From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx]On Behalf Of
merdan.atajanov@xxxxxxxxxxxxxx
Sent: Thursday, November 17, 2005 11:46 AM
To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: Re: Regd ipvsadm ouput

Did you set up your virtual IP properly? You have to set on all machines.

Quoting Vijay K <vijay_k@xxxxxxxxxxxxx>:

Hi all,

I am setting up a load balaced configuration.
I have run all the rpms downloaded from ultramonkey
I am using fedora core 4 for directord.
Ldirectord and heartbeat is working fine.

Now the problem is the output of the ipvsadm is not showing the
realservers,though I have used check type as connect and the real server
ip
addresses are mentioned in the ldirectord configuration.

#/sbin/ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
 -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.10.32.32:http rr
 -> dir1.vfortress.com:http      Local   1      0          0
TCP  10.10.32.32:https rr
 -> dir1.vfortress.com:https     Local   1      0          0


The output shows only the director machine with weight as 1 even though
real
servers are there in the configuration and they can be pinged.

Can somebody pelase let me know what is it that I am missing out.
Apart from the rpms should something be done so that ipvsadm gets the real
servers into configuration
Plase let me know..Thanks in advance for ur help

I look forward to help from you people on the list
Regds
Vijay

_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users




_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users

_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users





<Prev in Thread] Current Thread [Next in Thread>