|
Peter
I feel the compilation fails because of improper header/library files
linkage. (Since ucd-lvs-snmp refers to ucd-snmp libraries/header files).
A look at your complete error list might give more ideas.
Between, Joseph --> I feel that
1. The ucd-lvs-snmp module is not updated (since 2002) and still is based on
ucd-snmp.
2. The ucd-lvs-module now is not bundled in the LVS module. It is still a
seperate module.
Is my understanding correct?
regards
hebbar
----- Original Message -----
From: "Peter Nash" <peter.nash@xxxxxxxxxxxxxxxxx>
To: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, January 09, 2006 10:45 PM
Subject: Re: About SNMP/MIB for LVS (IPVS)
> I've been using the lvs-snmp utility for a couple of years to monitor my
> directors (along with the snmpipvsinfo.pl script). However, I've not been
> able to get it to compile on more recent versions of RedHat. It's
> currently running on RedHat 8 with net-snmp-5.0.6-8.80.2 which is quite
> old and I'm in the process of replacing the directors with machines
> running RedHat Enterprise Linux 4 so this is quite topical for me. I'd
> really like to be able to continue to use lvs-snmp but I'm not a C
> programmer and I get various "incompatible pointer type" errors when I try
> and compile it against the latest ipvsadm / RedHat 4 source which I've not
> been able to get past.
>
> Personally I prefer to use SNMP as it sits well with MRTG and NAGIOS that
> I use for monitoring.
>
> Regards,
>
> Peter.
>
> >
> > ----- Message from Joseph Mack NA3T <jmack@xxxxxxxx> on Fri, 6 Jan
> > 2006 05:55:46 -0800 (PST) -----
> >
> > To:
> >
> > Madhusudhan Hebbar <madhusudhan.hebbar@xxxxxxxxxxxxxxxx>, <lvs-
> > users@xxxxxxxxxxxxxxxxxxxxxx>
> >
> > Subject:
> >
> > Re: About SNMP/MIB for LVS (IPVS)
> >
> > On Fri, 6 Jan 2006, Madhusudhan Hebbar wrote:
> >
> > > Hi Is there a SNMP agent already developed for LVS? There
> > > was an earlier one lvs-snmp (done using ucd-snmp) that was
> > > contributed by
> > > http://anakin.swiss-support.net/~romeo/lvs-snmp/
> >
> > There's also a perl script snmpipvsinfo.pl in the section on
> > MRTG in the HOWTO
> >
> > > I was wondering whether the SNMP agent for LVS with
> > > information about IPVS (Indicating about Virtual services
> > > and real servers) is already bundled in the IPVS module.
> >
> > no. People don't seem to use SNMP a whole lot with LVS. I
> > expect it's because people don't use SNMP a lot, rather than
> > it's a bad idea to use SNMP with LVS.
> >
> > > Suppose IPVS MIB/SNMP information is not bundled along
> > > with the distribution, and if we need to develop a fresh
> > > SNMP Agent for LVS (IPVS), what would be the best way to
> > > do so?
> >
> > there's not a lot of people clamouring for the podium on
> > this, so if neither of these two scripts do what you want,
> > I'll be happy to include your script in the HOWTO too.
> >
> > Joe
> >
> > --
> > Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> > jmack (at) wm7d (dot) net - azimuthal equidistant map
> > generator at http://www.wm7d.net/azproj.shtml
> > Homepage http://www.austintek.com/ It's GNU/Linux!
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
>
|
