Hello everyone.
I've been reading all day today how to configure lvs with lvs-dr.
I'll explain my network setup. I have a router with a public IP, and I have
three servers with public IPs as well.
I have one director and two realservers. The director and the realservers
have one nic each, eth0.
On the director I have:
eth0: 72.15.219.10 (public IP)
eth0:99 72.15.219.11 (public vip)
eth0:100 10.3.1.1 (private ip)
gateway: 72.15.219.1
On the realserver I have:
eth0: 72.15.219.12 (public ip)
lo:0 72.15.219.11 (public vip)
eth0:100 10.3.1.2 (private ip)
gateway: 72.15.219.1
Both nics are on the same switch. While I can ping the public IPs from each
machine, I cannot ping the private IPs. Does this mean that I cannot ip
alias private IPs, if eth0 is a public ip?
Is it possible that when I try to ping 10.3.1.2 from the director, it
actualy goes to the router because of the gateway? I would think it would
find the realserver on the switch.
Should I get a second nic for each machine? I need to mix the public and
private IPs unfortunately the way our setup is.
Any help is highly appreciated!
Thanks,
Alex
|