LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: Configure IPVSADM

To: lvs <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Configure IPVSADM
From: Aniruddh Singh <aps@xxxxxxxxxxxxx>
Date: Thu, 23 Feb 2006 14:43:46 +0530
On Thu, 2006-02-23 at 09:51 +0100, José María Lopez Marzal wrote:
> Hi,
> 
>  
> 
> I have a problem. I tray to configure a load balancing with ipvsadm. I have 
> configure it of the following way:
> 
>  
> 
> I have two Server.
> 
> As virtual IP I have put: 192.168.1.4 (interface eth0:1)
> 
> Port: 80
> 
> Real Server: 192.168.1.2
> 
> My IP in the interface eth0 is 192.168.1.3
> 
> I open the ip_forward
> 
> My Operator System is Red Hat ES 3.0
> 
>  
> 
> When in the browse I put the virtual ip so that it send me to the real 
> server, it doesn't find the web page.
> 
>  
> 
> If I watch in ipvsadm -lc, it shows me the following line:
> 
>  
> 
> Pro       expire   state                 source                          
> virtual                           destination
> 
> TCP      00:22    SYN_RECV      192.168.1.10:1173         192.168.1.4:http    
>       192.168.1.2:http
 SYN_RECV shows that director is sending packet to real server but real
server is not sending it back.

what packet-forwarding-method are you using? 

>  
> 
> Somebody can help me with this problem?
> 
>  
> 
> Thanks,
> 
>  
> 
> José María
> 
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
-- 
Regards
Aniruddh Singh
System Administrator
Monster.com India Pvt. Ltd.
FC 23, Block B, 1st Floor, Sector 16A
Film City Noida 201301 U.P.



<Prev in Thread] Current Thread [Next in Thread>