|
On Tue, 21 Nov 2006, Davin Menhinck wrote:
Thanks Joe, not sure what you mean? Isn't this two networks
XXX.XXX.XXX.176/28(external) and 192.168.30.0/24(internal)?
sorry. I miss-read your post. I assumed the X'ed IPs you
didn't want me to look at. In that case never mind. Let me
go look at your original post again.
Joe
Also which
HOWTO are you refering to?
On 11/21/06, Joseph Mack NA3T <jmack@xxxxxxxx> wrote:
On Tue, 21 Nov 2006, Davin Menhinck wrote:
> Server IP info:
> loadb1
> IPaddr1 eth0 192.168.30.100/24
> IPaddr2 eth1 XXX.XXX.XXX.189/28
>
> loadb2
> IPaddr1 eth0 192.168.30.101/24
> IPaddr2 eth1 XXX.XXX.XXX.188/28
>
> webserver1
> IPaddr1 eth0 192.168.30.110/24
>
> webserver2
> IPaddr2 eth0 192.168.30.111/24
you have a one-network LVS-NAT setup. It's easier to setup a
two-network LVS-NAT, but if you really want a one-network
LVS-NAT, read the HOWTO
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|
