|
hello Joseph,
i gone through entire documenation of mini howto .
still there is not much suceess . i followed the all
the configs .
my client is 192.168.68.254 .
i want to use the direct routing .
the following are the configs which i did
changed the .conf files as said in the mini how to
and
http://www.ultramonkey.org/papers/lvs_tutorial/html/
in director
------------
/sbin/ifconfig eth0:0 192.168.68.201 broadcast
192.168.68.255 netmask 255.255.255.255
/sbin/route add -host 192.168.68.201 dev eth0:0
/sbin/ipvsadm -A -t 192.168.68.201:telnet -s rr
/sbin/ipvsadm -a -t 192.168.68.201:telnet -r
192.168.68.74 -g -w 1
/sbin/ipvsadm -a -t 192.168.68.201:telnet -r
192.168.68.73 -g -w 1
in realserver
-------------
sbin/ifconfig lo:0 192.168.68.201 netmask
255.255.255.255
still when i try to connect from 192.168.68.254
it doesnto even connect.
Your help will be highly appreciated.
regards
vlrk
--- Joseph Mack NA3T <jmack@xxxxxxxx> wrote:
> On Tue, 30 Jan 2007, vlrk wrote:
>
>
Iam running ipvs and i could not able to add real
servers to director/ virtual server .
My scenarios is as below.
A-> 192.168.68.49 ( director)
B-> 192.168.68.73 (real server)
C-> 192.168.68.49 (real server)
I have kernel version 2.6.10 running redhat EL in
three machines .
My aim is to acheive the following architectures
in B and C iam running the telnet service so any body
connectes to telent 192.168.68.49 it has to check with
real servers and connect to them based on availability
.
I want use tunneling .
the following commands i used .
ipvsadm -A -t 192.168.68.49:23
ipvsadm -a -t 192.168.68.49:23 -r 192.168.68.73:23 -i
ipvsadm -a -t 192.168.68.49:23 -r 192.168.68.74:23 -i
and in sysctl.conf of all ips ipv4 forward is enabled.
No firewall or iptables running.
if i try to connect from other machine like .254 it s
trying to connect and in A machine if see ipvsdm it
shows that 74 machine connection state as inactive, it
never tries to 73.
as a matter of fact i never seen B and C as connected
state in director when i see with ipvsadm.
so how to solve this .
Am i missing any thing here
> there's a detailed write up in the mini-HOWTO. Try
> that
>
> Joe
>
> --
> Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> jmack (at) wm7d (dot) net - azimuthal equidistant
> map
> generator at http://www.wm7d.net/azproj.shtml
> Homepage http://www.austintek.com/ It's GNU/Linux!
> _______________________________________________
> LinuxVirtualServer.org mailing list -
> lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to
> lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to
> http://www.in-addr.de/mailman/listinfo/lvs-users
>
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
|
