|
hi Joe,
Thanks for the reply
Where can I find an example of this script?
On Sun, 2007-04-22 at 16:17 -0700, Joseph Mack NA3T wrote:
> On Mon, 23 Apr 2007, Peter Biggerstaff wrote:
>
> > ok.. so I do all that as above, and everything looks fine.. the cluster
> > works, the routes are in place..
> > so that works fine.. but then I have the problem I described below, the
> > Direcotrs fail over perfectly
> > but the realservers don't use the second director... I thought all that
> > routing in chapter 30 would mean
> > that in effect the realservers would have 2 default gateways, and would
> > use whichever it could?
>
> Linux is not quite that smart, it will send some to one
> gateway and some to the other gateway.
>
> You need a single default gw, in LVS called the DIP. It's a
> secondary IP and on failover, and like the VIP, it is moved
> (by a script) from the primary to the secondary director.
>
> Joe
>
Kind Regards,
Peter Biggerstaff
Linux Desktop Development Specialist
P 09 276 00 00 F 09 276 0256 Ext 2478 M 021 784 167
peter.biggerstaff@xxxxxxxxxxxxxxxxxxxx www.healthalliance.co.nz
healthAlliance
New Zealand
- = Visit the HealthAlliance website at http://www.healthalliance.co.nz
= -
This e-mail message and any accompanying attachments may contain information
that is confidential and subject to legal privilege. If you are not the
intended recipient, do not read, use, disseminate, distribute or copy this
message or attachments. If you have received this message in error, please
notify the sender immediately and delete this message.
|
