|
hi,all.
my lvs is tunnel,realservers run squid ,all work well.but now i want a
realserver run two squid process(such as squid and squid2)with two ip
seperately.
For the time being, I'm using one director and just one real-server.
The setup is as follows:
director RIP = 192.168.100.122
LVS VIP = 192.168.100.203
real server RIP = 192.168.100.124(eth0)
RIP = 192.168.100.200(eth0:0)
[root@LAN-122 linux]# ipvsadm -ln
IP Virtual Server version 1.2.0 (size=1048576)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.100.203:80 wrr
-> 192.168.100.200:80 Tunnel 1 0 0
-> 192.168.100.124:80 Tunnel 1 0 0
realserver:
eth0 Link encap:Ethernet HWaddr 00:0D:61:6B:C0:F2
inet addr:192.168.100.124 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::20d:61ff:fe6b:c0f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:177497722 errors:0 dropped:0 overruns:1 frame:1
TX packets:151769553 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1613863993 (1.5 GiB) TX bytes:3776001903 (3.5 GiB)
eth0:0 Link encap:Ethernet HWaddr 00:0D:61:6B:C0:F2
inet addr:192.168.100.200 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14352327 errors:0 dropped:0 overruns:0 frame:0
TX packets:14352327 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2971562342 (2.7 GiB) TX bytes:2971562342 (2.7 GiB)
tunl0 Link encap:IPIP Tunnel HWaddr
inet addr:192.168.100.203 Mask:255.255.255.255
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:458 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:29063 (28.3 KiB) TX bytes:0 (0.0 b)
squid's squid.conf
http_port 192.168.100.124:80 transparent
squid2's squid.conf
http_port 192.168.100.200:80 transparent
now i telnet 192.168.100.203 80 from a client,it display:
[root@linuxtelnet 192.168.100.203 80
Trying 192.168.100.203...
telnet: connect to address 192.168.100.203: Connection refused
telnet: Unable to connect to remote host: Connection refused
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
＊ 上海帝联信息科技发展公司
＊ 邮编：2000333
＊ 电话：021-52835702
＊ －－－－－－－－－－－－－－－－－－－－－－－－－
＊ 上海：上海市普陀区中江路879号天地软件园21号楼１层
＊ 北京：北京市海淀区王庄路1号清华同方科技广场B座
＊ －－－－－－－－－－－－－－－－－－－－－－－－－
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
