|
thanks joe!you are so great!^=^
I had thought that maybe my pool english that nobody could understand my means.
I had used two vips to implement our reqirement.it running well now.
发件人： Joseph Mack NA3T
发送时间： 2007-07-06 22:08:45
收件人： LinuxVirtualServer.org users mailing list.
抄送：
主题： Re: [lvs-users] multiple IP on same NICs
On Tue, 26 Jun 2007, wlx wrote:
I don't see any replies to this. In case your question
hasn't been answered, sorry for the delay....
> hi,all.
> my lvs is tunnel,realservers run squid ,all work
> well.but now i want a realserver run two squid
> process(such as squid and squid2)with two ip seperately.
> For the time being, I'm using one director and just one
> real-server.
>
> The setup is as follows:
>
> director RIP = 192.168.100.122
> LVS VIP = 192.168.100.203
> real server RIP = 192.168.100.124(eth0)
> RIP = 192.168.100.200(eth0:0)
>
> [root@LAN-122 linux]# ipvsadm -ln
> IP Virtual Server version 1.2.0 (size=1048576)
> Prot LocalAddress:Port Scheduler Flags
> - > RemoteAddress:Port Forward Weight ActiveConn InActConn
> TCP 192.168.100.203:80 wrr
> - > 192.168.100.200:80 Tunnel 1 0 0
> - > 192.168.100.124:80 Tunnel 1 0 0
the ":80" are ignored in the last two lines, since you can't
redirect ports with LVS-Tun.
> realserver:
> eth0 Link encap:Ethernet HWaddr 00:0D:61:6B:C0:F2
> inet addr:192.168.100.124 Bcast:192.168.100.255 Mask:255.255.255.0
> inet6 addr: fe80::20d:61ff:fe6b:c0f2/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:177497722 errors:0 dropped:0 overruns:1 frame:1
> TX packets:151769553 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:1613863993 (1.5 GiB) TX bytes:3776001903 (3.5 GiB)
>
> eth0:0 Link encap:Ethernet HWaddr 00:0D:61:6B:C0:F2
> inet addr:192.168.100.200 Bcast:192.168.100.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
This isn't going to get you exactly what you want. Since you
only have one VIP on the realserver, then there is only one
instance of the server running on it. The director will send
ipip packets to both x.x.x.200 and x.x.x.124, but both
streams will arrive at the lo==VIP.
I can't see how to do what you want with LVS-Tun. You can do
it with LVS-NAT.
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:14352327 errors:0 dropped:0 overruns:0 frame:0
> TX packets:14352327 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2971562342 (2.7 GiB) TX bytes:2971562342 (2.7 GiB)
>
> tunl0 Link encap:IPIP Tunnel HWaddr
> inet addr:192.168.100.203 Mask:255.255.255.255
> UP RUNNING NOARP MTU:1480 Metric:1
> RX packets:458 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:29063 (28.3 KiB) TX bytes:0 (0.0 b)
> squid's squid.conf
> http_port 192.168.100.124:80 transparent
> squid2's squid.conf
> http_port 192.168.100.200:80 transparent
the service has to listen on the VIP, not the RIPs. The
client is sending its requests to the VIP.
> now i telnet 192.168.100.203 80 from a client,it display:
>
> [root@linuxtelnet 192.168.100.203 80
> Trying 192.168.100.203...
> telnet: connect to address 192.168.100.203: Connection refused
> telnet: Unable to connect to remote host: Connection refused
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
