[lvs-users] ldirectord virtual IP

[Abraham olivares Varela <abraham_ov@xxxxxxxxxxxx>]

Hi everybody

i try to configure ldirectord in order to build a load balancing cluster.

i used the following link to do it:

http://www.ultramonkey.org/3/topologies/lb-eg.html

my ldirectord.conf

# Global Directives
checktimeout=10
checkinterval=2
#fallback=127.0.0.1:80
autoreload=no
logfile="/var/log/ldirectord.log"
logfile="local0"
emailalert="abraham_ov@xxxxxxxxxxxx"
emailalertfreq=5
emailalertstatus=all
quiescent=yes

# Sample for an http virtual service
virtual=192.168.1.64:80
        fallback=127.0.0.1:80
        real=192.168.1.65:80 masq
        real=192.168.1.66:80 masq
        service=http
        request="index.html"
        #receive="Test  Page"
        #virtualhost=some.domain.com.au
        scheduler=rr
        #persistent=600
        #netmask=255.255.255.255
        protocol=tcp
        checktype=on
        #checkport=80
        #request="index.html"
        #receive="Test Page"
        #virtualhost=www.x.y.z

ldirectord is running but i don't know why it didn't create the Virtual IP

# /sbin/ip addr sh

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
        valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:19:db:75:d2:27 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.66/24 brd 192.168.1.255 scope global eth0
    *****normally here there will be the virtaul IP************
    inet6 fe80::219:dbff:fe75:d227/64 scope link 
        valid_lft forever  preferred_lft forever

3: sit0: <NOARP> mtu 1480 qdisc noop
    link/sit 0.0.0.0 brd 0.0.0.0

Thanks and Best Regards
 Abraham OLIVARES
       
---------------------------------

¡Sé un mejor ambientalista!
Encuentra consejos para cuidar el lugar donde vivimos en:
http://mx.yahoo.com/promos/mejorambientalista.html