LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: [lvs-users] problems with hc-ha-lb architecture

To: Joseph Mack NA3T <jmack@xxxxxxxx>
Subject: Re: [lvs-users] problems with hc-ha-lb architecture
Cc: "LinuxVirtualServer.org users mailing list." <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
From: Jordi Garcia <jgarcia@xxxxxxxxxxxx>
Date: Fri, 07 Sep 2007 09:18:07 +0200

Ok,

but I break ha filosofy, aren't you?



Jordi

El jue, 06-09-2007 a las 10:37 -0700, Joseph Mack NA3T escribió:
> On Thu, 6 Sep 2007, Jordi Garcia wrote:
> 
> > My problem is with lb master server, I cannot use VIP address by connect
> > to db backend:
> 
> it's part of the design of LVS. You can't connect from the 
> director to the VIP on the realserver because the director 
> also has the VIP. You could run a server process on the RIP 
> and connect to that.
> 
> Joe


Advertencia importante
Este mensaje contiene informacion confidencial y/o privilegiada. Si usted no es 
el destinatario o una persona expresamente autorizada por el destinatario para 
recibir este mensaje no debe utilizar, copia, reenviar, distribuir o, en 
general, disponer en ninguna forma de la informacion incluida en el mismo. Si 
se hubiera recibido este mensaje por error, sirvase informar al emisor en tal 
sentido mediante una respuesta inmediata y borrelo, por favor. Gracias por su 
colaboracion. 

Important notice
This message contains confidential and/or privileged information. If you are 
not the addressee or authorized to receive this for the addressee, you must not 
use, copy, forward, disclose or take any action based on this message or any 
information herein. If you receive this message in error, please advise the 
sender immediately by reply e-mail and delete this message. Thank you for your 
cooperation. 


_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
<Prev in Thread] Current Thread [Next in Thread>