|
Thanks Jack,
I will try mini-HOWTO.
Thanks & Regards,
Narsan V| NGN | Tech Mahindra R&D
9/7 Hosur Road , Bangalore - 560029
( Office: +91-080-25539232 | Extn: 2210
Email: narsanv@xxxxxxxxxxxxxxxx
www.techmahindra.com
-----Original Message-----
From: lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx
[mailto:lvs-users-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of Joseph
Mack NA3T
Sent: Thursday, February 28, 2008 6:16 PM
To: LinuxVirtualServer.org users mailing list.
Subject: Re: [lvs-users] Basic LVS configuration on RHEL 4 - IP
forwardingis not happening
On Thu, 28 Feb 2008, Narsan Vvl wrote:
> When tried to test the load balancer by sending udp messages on port
> 5060, my load balancer was not forwarding it to the real server.
try a tcp setup using one of the setups in the mini-HOWTO.
Then read about ntp as a service in the HOWTO and get that
to work, then try your service.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
============================================================================================================================
Disclaimer:
This message and the information contained herein is proprietary and
confidential and subject to the Tech Mahindra policy statement, you may review
the policy at <a
href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahindra.com/Disclaimer.html</a>
externally and <a
href="http://tim.techmahindra.com/Disclaimer.html";>http://tim.techmahindra.com/Disclaimer.html</a>
internally within Tech Mahindra.
============================================================================================================================
|
